<div dir="auto">I always set joiner blades with a straight edge. First, use the straight edge to check that the blade edges are sharpened straight. Offset any small notches so they don't form a groove. Grind out any significant notches in the blades or get new ones. <div dir="auto"><br></div><div dir="auto">I then set and level them to the out table. Set the straight edge on the out table extended over the blades. When you rock the blades back and forth, they should barely touch the straight edge all the way across. </div></div><div class="gmail_extra"><br><div class="gmail_quote">On Feb 20, 2018 12:19 AM, "Kirk D Mccann" <<a href="mailto:kirk.mccann@gmail.com">kirk.mccann@gmail.com</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">I stopped by today and it looks like those blades need to be sharpened or replaced. <div><br></div><div>Do you know where I could find a Oneway Multi Gauge so I can make sure the blades are level with the out table? Or at least something with a good level of accuracy.<div><br></div><div>-Kirk</div></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Mon, Feb 19, 2018 at 12:55 AM, Tyler Crumpton <span dir="ltr"><<a href="mailto:tyler.crumpton@gmail.com" target="_blank">tyler.crumpton@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">It may need a new blade, IIRC. I remember hearing complaints of it leaving scars in the wood. I believe it's an 8" joiner.<div class="gmail_extra"><span class="m_-6432506579775989751HOEnZb"><font color="#888888"><br clear="all"><div><div class="m_-6432506579775989751m_6377440618429250182gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><span></span>Tyler Crumpton<span><font color="#888888"><br><a href="mailto:tyler.crumpton@gmail.com" target="_blank">tyler.crumpton@gmail.com</a><br></font></span></div></div></div></font></span><div><div class="m_-6432506579775989751h5">
<br><div class="gmail_quote">On Mon, Feb 19, 2018 at 12:25 AM, Kirk D Mccann <span dir="ltr"><<a href="mailto:kirk.mccann@gmail.com" target="_blank">kirk.mccann@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">By not in the greatest shape do you mean out of alignment or is the in/outfeed table(s) damaged? <div><br></div><div>Any idea how wide it is? </div><div><br></div><div>Thanks,</div><div>Kirk</div></div><div class="m_-6432506579775989751m_6377440618429250182HOEnZb"><div class="m_-6432506579775989751m_6377440618429250182h5"><div class="gmail_extra"><br><div class="gmail_quote">On Mon, Feb 19, 2018 at 12:11 AM, Tyler Crumpton <span dir="ltr"><<a href="mailto:tyler.crumpton@gmail.com" target="_blank">tyler.crumpton@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">We have an older joiner that is not in the greatest shape, but we do also have a 12" planer in good condition. Someone was even using it just today!<div><br></div><div>Cheers,</div><div>Tyler</div><div class="gmail_extra"><br clear="all"><div><div class="m_-6432506579775989751m_6377440618429250182m_1580012856549913872m_287927785709925678gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><span></span>Tyler Crumpton<span><font color="#888888"><br><a href="mailto:tyler.crumpton@gmail.com" class="m_-6432506579775989751m_6377440618429250182m_1580012856549913872m_287927785709925678fullcontact-highlight" target="_blank">tyler.crumpton@gmail.com</a><br></font></span></div></div></div>
<br><div class="gmail_quote"><span>On Mon, Feb 19, 2018 at 12:04 AM, Kirk D Mccann <span dir="ltr"><<a href="mailto:kirk.mccann@gmail.com" target="_blank">kirk.mccann@gmail.com</a>></span> wrote:<br></span><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><span><div dir="ltr">Does anyone know if the shop has a joiner? I looked through the wiki and didnt see one but I figured there had to be one there. <span class="m_-6432506579775989751m_6377440618429250182m_1580012856549913872m_287927785709925678HOEnZb"><font color="#888888"><div><br></div><div>-Kirk</div></font></span></div>
<br></span>______________________________<wbr>_________________<br>
This is the general mailing list.<br>
This list is for public discussion about Makers Local and related activities.<br>
To stop receiving mail from this list, write to <a href="mailto:general-leave@lists.makerslocal.org" target="_blank">general-leave@lists.makersloca<wbr>l.org</a>.<br></blockquote></div><br></div></div>
<br>______________________________<wbr>_________________<br>
This is the general mailing list.<br>
This list is for public discussion about Makers Local and related activities.<br>
To stop receiving mail from this list, write to <a href="mailto:general-leave@lists.makerslocal.org" target="_blank">general-leave@lists.makersloca<wbr>l.org</a>.<br></blockquote></div><br></div>
</div></div><br>______________________________<wbr>_________________<br>
This is the general mailing list.<br>
This list is for public discussion about Makers Local and related activities.<br>
To stop receiving mail from this list, write to <a href="mailto:general-leave@lists.makerslocal.org" target="_blank">general-leave@lists.makersloca<wbr>l.org</a>.<br></blockquote></div><br></div></div></div></div>
<br>______________________________<wbr>_________________<br>
This is the general mailing list.<br>
This list is for public discussion about Makers Local and related activities.<br>
To stop receiving mail from this list, write to <a href="mailto:general-leave@lists.makerslocal.org" target="_blank">general-leave@lists.makersloca<wbr>l.org</a>.<br></blockquote></div><br></div>
<br>______________________________<wbr>_________________<br>
This is the general mailing list.<br>
This list is for public discussion about Makers Local and related activities.<br>
To stop receiving mail from this list, write to <a href="mailto:general-leave@lists.makerslocal.org">general-leave@lists.<wbr>makerslocal.org</a>.<br></blockquote></div></div>