[ML-Hams] Fwd: [Makers] Art area floor 3/14

[Bruce Campbell]

I have 100' length.

Bruce KG4HLZ

On Fri, Mar 13, 2015 at 9:57 PM, Jeff Cotten <omegix at gmail.com> wrote:

>
> FYI
>
> ---------- Forwarded message ----------
> From: Jeff Cotten <omegix at gmail.com>
> Date: Fri, Mar 13, 2015 at 9:56 PM
> Subject: Re: [Makers] Art area floor 3/14
> To: Members only discussion about Makers Local 256 <
> makers at lists.makerslocal.org>
>
>
>
> Hi all, I've run a length of yellow cord up above the art area in case the
> HAM Shackers want to run coax from the A/V area to out one of the existing
> holes while the paint is drying.
>
> Also, if anyone has a nice 150 ft. Run of well shielded coax cable, we're
> on the hunt :)
>
> On Thu, Mar 12, 2015 at 10:37 PM, Tim H <crashcartpro at gmail.com> wrote:
>
>> Apologies for the late notice:
>>
>> This Saturday, The Facilities committee (Tim and Phil) will be
>> reinforcing the floor in the "Art Area" of the loft, above the office. As
>> such, much of the area will be unusable this weekend, and for a week or two
>> while the paint dries.
>>
>> If anyone can come help with this, we will probably be at it for most of
>> Saturday. Starting at 7am and finishing when it's finished. (I would like
>> to be done in the early afternoon, and many hands make light work)
>>
>> Thank you all for being awesome makers.
>> -Tim
>>
>> _______________________________________________
>> Makers mailing list
>> Makers at lists.makerslocal.org
>> http://lists.makerslocal.org/mailman/listinfo/makers
>>
>
>
>
> _______________________________________________
> Hams mailing list
> Hams at lists.makerslocal.org
> http://lists.makerslocal.org/mailman/listinfo/hams
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.makerslocal.org/pipermail/hams/attachments/20150313/5af96661/attachment.html>