[ML-Hams] new mast

[Jake Polatty]

We could fabricate a bracket to help keep the mast off the ground.

-Jake


On Mon, Aug 22, 2016 at 9:02 AM, Erik Arendall <earendall at gmail.com> wrote:

> Do you have a link to the mast?
>
> On Aug 22, 2016 9:00 AM, "Chris Bero" <bigbero at gmail.com> wrote:
>
>> Now we don't have to worry about trying to weld one together. Wow, that's
>> really excellent!
>>
>> Chris Bero
>>
>> On Mon, Aug 22, 2016 at 8:53 AM, Jeff Cotten <omegix at gmail.com> wrote:
>>
>>>
>>> I purchased a 50 foot telescoping fiberglass mast for the shop at
>>> Hamfest on Sunday.  It's one of the large diameter HF masts, so it will
>>> support multiple antenna mounts, and also reduce any grounding needs that a
>>> metal pole would have required.
>>>
>>> Lisa will be dropping it off on Tuesday, and within a week or two some
>>> extra parts for keeping it extended will arrive in the mail.
>>>
>>> The seller said however we mount it, to make sure the section resting on
>>> the ground is held slightly off the ground so that rainwater can escape out
>>> the bottom.
>>>
>>> _______________________________________________
>>> This is the hams mailing list.
>>> This list is for amateur radio discussion.
>>> To stop receiving mail from this list, write to
>>> hams-leave at lists.makerslocal.org.
>>>
>>
>>
>> _______________________________________________
>> This is the hams mailing list.
>> This list is for amateur radio discussion.
>> To stop receiving mail from this list, write to
>> hams-leave at lists.makerslocal.org.
>>
>
> _______________________________________________
> This is the hams mailing list.
> This list is for amateur radio discussion.
> To stop receiving mail from this list, write to
> hams-leave at lists.makerslocal.org.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.makerslocal.org/pipermail/hams/attachments/20160822/cea8caa6/attachment.html>