[ML-Hams] amplifier

[Jeff Cotten]

Does anyone know from looking at all the stuff on the ham station if any of
that stuff is an amplifier?

We can go up to 10W for broadcasting a bbhn mesh signal ( 2.4ghz )

FYI, here's some advice we received on the setup:

"
You will want your node in a watertight box up with two glands so cales can
exit. Put it up on the pole with a very short very good coax run like 9913
or LMR400. Run power and ethernet up to the node box. You can put both on a
single run of Category 5 cable.

Don't forget that hams are permitted amplifiers for spread spectrum, up to
10 watts (without automatic power control). An amp of the biamp type which
includes an LNA preamp on receive is better, and one that includes a
channel band pass filter is better still.
"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.makerslocal.org/pipermail/hams/attachments/20161207/e6abc5cc/attachment.html>