[ML-General] IMU units

[david]

Stephan,

I don't get the surfboard reference.
This guy mounts them on a board, along with a little bit of glue logic, 
and sells them via Paypal and through this vendor:

Kris Winer <onehorse at earthlink.net>

https://www.tindie.com/

Here is the link to the board:

https://www.tindie.com/products/onehorse/bno-055-9-axis-motion-sensor-with-hardware-sensor-fusion/

He makes another one so you get to choose which IMU you want to play 
with.  $36 plus $2.50 shipping.

I had to buy them direct from Kris as the Tindie website didn't work for me.
Oh, and for tech support he referred me to the Bosch documentation. :)
The boards appear to be of good quality.

David Merchant




On 04/22/15 20:49, Stephan Henning wrote:
> David, have you found a source selling these on a surfboard?  I'm 
> interested in possible tinkering with them, curious if I need to spin 
> a board for them though or if someone has already done the 'hard' work.
>
> -stephan
>
> On Wed, Apr 22, 2015 at 7:22 PM, James Fluhler <j.fluhler at gmail.com 
> <mailto:j.fluhler at gmail.com>> wrote:
>
>     I had not heard of these before look pretty cool I may have to
>     pick up some! If you find some success with these maybe toss up a
>     quick tutorial sometime!
>
>     James F.
>
>     On Apr 22, 2015, at 7:02 PM, david <ainut at knology.net
>     <mailto:ainut at knology.net>> wrote:
>
>>     Thanks, Matthew,   I downloaded that before I bought one to be
>>     sure it would work for my application.  Are you by chance playing
>>     with them, too?
>>
>>     David
>>
>>
>>
>>
>>     On 04/22/15 18:08, matthew varian wrote:
>>>     Here is the data sheet for it, it should get you up and going
>>>     http://ae-bst.resource.bosch.com/media/products/dokumente/bno055/BST_BNO055_DS000_12~1.pdf
>>>     <http://ae-bst.resource.bosch.com/media/products/dokumente/bno055/BST_BNO055_DS000_12%7E1.pdf>
>>>
>>>     Good luck!
>>>
>>>     On Wed, Apr 22, 2015 at 6:02 PM, david <ainut at knology.net
>>>     <mailto:ainut at knology.net>> wrote:
>>>
>>>         Anyone playing with the Bosch BNO-055 units, with internal
>>>         "sensor fusion" already built-in?  I just received two of
>>>         them and can't wait to solder the pins so I can tinker!
>>>
>>>         Any comments about the device?  They're a bit less than $35
>>>         for a Teensy 3.1 compatible board.  I plan to use them with
>>>         a Beaglebone Black.  They are 3.3V units and use I2C.
>>>
>>>         David Merchant
>>>
>>>
>>>         _______________________________________________
>>>         General mailing list
>>>         General at lists.makerslocal.org
>>>         <mailto:General at lists.makerslocal.org>
>>>         http://lists.makerslocal.org/mailman/listinfo/general
>>>
>>>
>>>
>>>
>>>     _______________________________________________
>>>     General mailing list
>>>     General at lists.makerslocal.org  <mailto:General at lists.makerslocal.org>
>>>     http://lists.makerslocal.org/mailman/listinfo/general
>>
>>     _______________________________________________
>>     General mailing list
>>     General at lists.makerslocal.org <mailto:General at lists.makerslocal.org>
>>     http://lists.makerslocal.org/mailman/listinfo/general
>
>     _______________________________________________
>     General mailing list
>     General at lists.makerslocal.org <mailto:General at lists.makerslocal.org>
>     http://lists.makerslocal.org/mailman/listinfo/general
>
>
>
>
> _______________________________________________
> General mailing list
> General at lists.makerslocal.org
> http://lists.makerslocal.org/mailman/listinfo/general

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.makerslocal.org/pipermail/general/attachments/20150423/57135be4/attachment.html>