[ML-General] Which (free) Linux electrical cad software?

[Joshua Pritt]

http://fritzing.org/home/

On Thu, Dec 24, 2015 at 8:51 AM, david <ainut at knology.net> wrote:

> I'd like to document some circuits.
>
> Part A is block diagrams with a name for each block and maybe a place to
> write it's function in text.  Color support for the interconnects would
> be nice.
>
> Part B is maybe a Spice-like circuit analysis, drawn from the block
> diagram level and drill down to each individual IC and component.  it
> would be great if it has a library of IC's and components with their
> electrical characteristics available.  Thermocouples are involved, as
> well as their analog voltages being measured and converted into an I2C
> signal for reading by a Beaglebone Black or Raspberry Pi 2.  Color
> support (and stripes) for the actual wires would be very nice.
>
> Rubber banding of wiring and connections is mandatory.  :)
>
> So what do you guys suggest so that I may make pretty documents for
> these circuits?
>
> Thanks,
> David Merchant
>
>
> _______________________________________________
> General mailing list - General at lists.makerslocal.org
> A service of Makers Local 256 - https://256.makerslocal.org/
> http://lists.makerslocal.org/mailman/listinfo/general
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.makerslocal.org/pipermail/general/attachments/20151224/1c0c75c8/attachment.html>