[ML-General] The Laser Cutter at my job! Also, MY JOB IS HIRING

[R Marion]

Y'all email Tim! Tell him I sent you and you want to look at helping get
this laser going!
GO GO GO

On Tue, Feb 19, 2019, 4:34 PM Joe Iacuzzo <joe.iacuzzo at gmail.com wrote:

> Yes, I did forget that David told me about the Cohesion board. Thanks for
> the guidance David!
>
> On Tue, Feb 19, 2019 at 4:15 PM David Cantrell <madhatter at hackshaq.com>
> wrote:
>
>> Sounds like a very interesting project.
>>
>> Being the one that was the source of the recommendation for cohesion I am
>> also interested in being involved with the laser cutter upgrade. If
>> possible I would also like to be able to connect with Tim.
>>
>> On Tue, Feb 19, 2019 at 1:53 PM R Marion <rmarionjunior at gmail.com> wrote:
>>
>>> Hey Joe,
>>> Would you mind having this person contact Tim and letting him know about
>>> that board and switch out? He'd be most appreciative, and would pay for her
>>> time.
>>>
>>> On Tue, Feb 19, 2019, 12:51 PM Joe Iacuzzo <joe.iacuzzo at gmail.com wrote:
>>>
>>>> Ronnie,
>>>> That is the same laser cutter Kathryn and I  recently bought. We really
>>>> like it. However, we had to purchase a new control board to get it working
>>>> well. We got the Cohesion board. Also, we put in a metal honeycomb surface.
>>>> Importantly, we had Diana Jensen set it up for us, but that was because we
>>>> knew nothing about it. She was VERY helpful.
>>>> Joe
>>>>
>>>> On Tue, Feb 19, 2019 at 8:32 AM R Marion <rmarionjunior at gmail.com>
>>>> wrote:
>>>>
>>>>> Hey fellow makers,
>>>>> So my job (MaxVision/Rugged Portable Computers) in Madison has a laser
>>>>> cutter, and would like some assistance getting it up and running.  Please
>>>>> let me know if anyone is willing to help us out.
>>>>>
>>>>> Also, just another friendly reminder, this job is hiring tinkery
>>>>> buildery types. I got headhunted for this job last year at an open house
>>>>> night at ML256, and I cannot overstate how great this job has been. If you
>>>>> have questions about it, just email me, and if you have a resume, send it
>>>>> to Tim.Jackson at maxvision.com and tell him Ronnie sent you!
>>>>>
>>>>> Attached is a couple of photos of the aforementioned Laser Cutter.
>>>>> Thanks in advance!
>>>>>
>>>>> Ronnie Marion, Jr.
>>>>> _______________________________________________
>>>>> This is the general mailing list.
>>>>> This list is for public discussion about Makers Local and related
>>>>> activities.
>>>>> To stop receiving mail from this list, write to
>>>>> general-leave at lists.makerslocal.org.
>>>>
>>>> _______________________________________________
>>>> This is the general mailing list.
>>>> This list is for public discussion about Makers Local and related
>>>> activities.
>>>> To stop receiving mail from this list, write to
>>>> general-leave at lists.makerslocal.org.
>>>
>>> _______________________________________________
>>> This is the general mailing list.
>>> This list is for public discussion about Makers Local and related
>>> activities.
>>> To stop receiving mail from this list, write to
>>> general-leave at lists.makerslocal.org.
>>
>> --
>> Regards. David
>> 256.615.2277
>> Sent from my cell phone
>> _______________________________________________
>> This is the general mailing list.
>> This list is for public discussion about Makers Local and related
>> activities.
>> To stop receiving mail from this list, write to
>> general-leave at lists.makerslocal.org.
>
> _______________________________________________
> This is the general mailing list.
> This list is for public discussion about Makers Local and related
> activities.
> To stop receiving mail from this list, write to
> general-leave at lists.makerslocal.org.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.makerslocal.org/pipermail/general/attachments/20190219/2063c70d/attachment.html>