[General] Front door of the new shop.

[Jake Polatty]

Looks good to me.  Plus they have it out in Madison.  Now all we have to do
is to get some company to donate it.

-Jake


On Fri, Apr 24, 2009 at 8:31 AM, Will <nyphbl8d at gmail.com> wrote:

> On Fri, Apr 17, 2009 at 11:46 AM, Bob <themostbob at gmail.com> wrote:
> > Possibly, but frankly I want to go Mad Max on the bitch and use a thick
> > steel piece going all the way up and down the door frame.
> >
> > Bob
> >
> > On Fri, Apr 17, 2009 at 11:11 AM, Nathan W. <greenfday6 at gmail.com>
> wrote:
> >> I know we have a couple strike plates for a door.  Would this be
> something
> >> to think about when changing the door and fixing the frame?
> >>
> >> On Fri, Apr 17, 2009 at 9:35 AM, Bob <themostbob at gmail.com> wrote:
> >>> Makers:
> >>>
> >>> The front door of our new shop is in pretty poor shape - I think it's
> in
> >>> our best interest to replace it and repair the strike-plate side of the
> door
> >>> jam at the same time.  I'll take point on this and work on it after we
> get
> >>> the majority of stuff moved over tomorrow and/or Sunday.
> >>>
> >>> If anyone knows a source for steel doors, cheap, let me know.  Also, if
> >>> anyone has time today and wants to go to the Habitat for Humanity
> Re-Store,
> >>> I'd like to know if they have any.
> >>>
> >>> The door is standard size: 31.75 x 71.25 inches - standard for a 32x72
> >>> opening.
> >>>
> >>> Bob (korc)
>
> Since we're going to be doing a bit of work to the shop this weekend,
> I figured it would be good to open this discussion again.  I fully
> support the mad max style door frame.  I can probably manage to get a
> steel door from lowes if we can't get one elsewhere.  I think this is
> the one we want:
>
> http://www.lowes.com/lowes/lkn?action=productDetail&productId=16031-000053596-16031&lpage=none
>
> I'm pretty sure it's the correct handedness for the frame we have, and
> it also happens to be the cheapest solid steel door they have.
>
> Kinsey
>
> _______________________________________________
> General mailing list
> General at lists.makerslocal.org
> https://lists.makerslocal.org/mailman/listinfo/general
>



-- 
Jake Polatty, KI4BTJ
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.makerslocal.org/pipermail/general/attachments/20090424/bb7273de/attachment.htm>