[General] Laser Cutter Ventilation

Tue May 8 12:52:15 CDT 2012

I've added a place under (https://256.makerslocal.org/wiki/40_Watt_Laser_Cutter#Ventilation_Improvement) for "Project Financing Signup:"
Phil

________________________________
 From: John Kelly <candleknight at gmail.com>
To: general at lists.makerslocal.org 
Sent: Tuesday, May 8, 2012 12:33 PM
Subject: Re: [General] Laser Cutter Ventilation

1. I plan to attach it wherever I can. Eventually it'd be nice to have it go out through the roof or vent stack or wall or something. For now though, I'm just planning on routing it to the giant exhaust fan in the chemistry area to avoid having to deal with any facilities issues. Baby steps.

2. If I'm going to be taking donations to help fund this, then I plan on making this 'our' property. Unless we want to order it through ML256's amazon account for some kind of tax/ nonprofit perks reason, I was just planning on ordering it myself and donating it to the shop, so any money you want to chip in would count as a donation to ML256 if we do it right. I'm not sure of the exact logistics though. Might be easiest to have the shop reimburse me, and then we all make "unrelated" donations for our pledge amounts. Or something. Taxes are hard...

-Candleknight

(John Kelly)

On Tue, May 8, 2012 at 12:00 PM, <general-request at lists.makerslocal.org> wrote:

Send General mailing list submissions to
>       general at lists.makerslocal.org
>
>To subscribe or unsubscribe via the World Wide Web, visit
>       http://lists.makerslocal.org/mailman/listinfo/general
>or, via email, send a message with subject or body 'help' to
>       general-request at lists.makerslocal.org
>
>You can reach the person managing the list at
>       general-owner at lists.makerslocal.org
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of General digest..."
>
>
>Today's Topics:
>
>  1. Re: Laser Cutter Ventilation (Bob)
>  2. Re: Laser Cutter Ventilation (David Reimer)
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Tue, 8 May 2012 11:42:01 -0500
>From: Bob <themostbob at gmail.com>
>To: General discussion about makerslocal
>       <general at lists.makerslocal.org>
>Subject: Re: [General] Laser Cutter Ventilation
>Message-ID:
>       <CAKPKm1TgJZc1spsoU=4B3W=9qMzCtk1oztjObgfLgVzbb7i-jg at mail.gmail.com>
>Content-Type: text/plain; charset=UTF-8
>
>I imagine you plan to attach to the building's vent stack?
>
>--
>bk
>
>On Tue, May 8, 2012 at 11:36 AM, John Kelly <candleknight at gmail.com> wrote:
>
>> For those of you too lazy to click the link, here's the cliffnotes version
>> of the "Finalized" Materials List:
>> 1x 8" InLine blower Fan @ $120
>> 3x 8" ducting @ $25 each = $75
>> 1x Blower Speed Controller @ $22
>> Total cost ? $217 ? $30 (for hookers and blow)
>
>
>
>------------------------------
>
>Message: 2
>Date: Tue, 8 May 2012 11:44:27 -0500
>From: David Reimer <davidreimerartist at gmail.com>
>To: General discussion about makerslocal
>       <general at lists.makerslocal.org>
>Subject: Re: [General] Laser Cutter Ventilation
>Message-ID:
>       <CACRhT7cWRcnS1xPPN25pgJDA1Z8PGZM0keqrV2Xi6vR4ZA3WAA at mail.gmail.com>
>Content-Type: text/plain; charset="utf-8"
>
>I definitely want to help fund this. What is this metaphorical hat I'll be
>dumping money into? That is, would I be donating to Makers or to you
>personally?
>
>David
>
>
>On Tue, May 8, 2012 at 11:36 AM, John Kelly <candleknight at gmail.com> wrote:
>
>> Hello all!
>> A while back I was working on seriously upgrading the ventilation system
>> for the laser cutter and electronics lab. I got through the design phase,
>> but sort of lost steam and interest just shy of actually ordering and
>> installing the parts, in part due to a temporary hiatus I was taking after
>> getting 'burned out' playing with the laser cutter (pun intended). Well,
>> now I'm back at it and the last time I tried to use the laser cutter it
>> gave off some very stinky vapors, and after my throat started tingling I
>> was acutely reminded of the need to finish this project. Respirator masks
>> shouldn't be required attire for the laser cutter room.
>>
>> I remember the first time I got really into using the laser cutter I
>> started to develop a cough after a few weeks, and now sometimes just being
>> in the fab lab a few hours after someone has been cutting something, you
>> can just sort of smell the death hanging in the air (only 'mostly'
>> hyperbole). I addition to the laser cutter, this upgrade would also add
>> ventilation and fume removal capabilities to the electronics work area and
>> soldering stations, whose fumes are less pungent and immediately
>> irritating, but are still not exactly healthy and need to be taken care of
>> . I know some of us like to joke around about the "delicious fumes" and
>> whatnot, but in all honesty this is a very real safety hazard that is long
>> past due to be dealt with.
>>
>> My picks for equipment, pricing, and some research notes and links are on
>> the wiki at the link below.
>>
>> https://256.makerslocal.org/wiki/40_Watt_Laser_Cutter#Ventilation_Improvement
>>
>> For those of you too lazy to click the link, here's the cliffnotes version of
>> the "Finalized" Materials List:
>> 1x 8" InLine blower Fan @ $120
>> 3x 8" ducting @ $25 each = $75
>> 1x Blower Speed Controller @ $22
>> Total cost ? $217 ? $30 (for hookers and blow)
>>
>> *Anyone who wants to throw some money into the hat to help with the cost
>> would be much appreciated!*
>>
>> I'm hoping to start ordering parts/installing stuff latter this week-ish
>> or next week.
>>
>> *coughcough**wheeeeeeze*
>> -Candleknight
>>
>> (John Kelly)
>>
>> _______________________________________________
>> General mailing list
>> General at lists.makerslocal.org
>> http://lists.makerslocal.org/mailman/listinfo/general
>>
>
>
>
>--
>David Reimer
>256-323-0853, davidreimerartist at gmail.com
>Graphic Designer / Illustrator / Web Designer
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: <http://lists.makerslocal.org/pipermail/general/attachments/20120508/e8f0e685/attachment-0001.html>
>
>------------------------------
>
>_______________________________________________
>General mailing list
>General at lists.makerslocal.org
>http://lists.makerslocal.org/mailman/listinfo/general
>
>End of General Digest, Vol 45, Issue 8
>**************************************
>

_______________________________________________
General mailing list
General at lists.makerslocal.org
http://lists.makerslocal.org/mailman/listinfo/general
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.makerslocal.org/pipermail/general/attachments/20120508/5b6a5761/attachment.html>