[General] multi-roter drones...

[WebDawg]

I like this.  Can I post it on a wiki?


On Tue, Nov 12, 2013 at 8:54 AM, Dan Hess <dan9186 at gmail.com> wrote:

> Ok, as promised here's my spreadsheet on parts.  Since I'm building a mini
> quad and a hex, I made another page that accounts for the minimal overlap
> between the two.
>
> I built this list while a few others were building theirs and came to the
> realization that they were breaking more than they had hoped for and had to
> wait on parts to get in and such.  So I've included a few extra of some of
> the parts that seem to get broken.  They've been noted, so if you wish to
> ignore them you can.
>
> This whole thing does not include an actual frame since there are several
> out there you can buy or print.  The hex, I did spec for a 550mm diagonal
> from motor to motor.  If you go lower than that, you might touch blades and
> bad things ensue.
>
>
> https://docs.google.com/spreadsheet/ccc?key=0AifgCfuTOa2hdG1HdHg4d3dZOXBmNU1iaUtPM2ZmTkE&usp=sharing
>
>
> Thanks,
>
> Daniel H.
> Google Voice:  (901) 214-5326
>
> - Copying one is plagiarism, copying many is research.
>
>
> On Mon, Nov 11, 2013 at 9:55 PM, claudio donndelinger <orias3141 at gmail.com
> > wrote:
>
>> There's also a group of RepRap users on Freenode in #multirotors. There's
>> several helpful people in addition some helpful vendors as well.
>>
>> Claudio Donndelinger
>> 323-963-3141
>>
>>
>> On Mon, Nov 11, 2013 at 9:48 PM, Stephan Henning <shenning at gmail.com>wrote:
>>
>>> For you guys interested in multirotors, I'd suggest heading over to
>>> rcgroups and checking out what these guys are doing.
>>>
>>> Ran into one thread where a gentlemen is building quad frames in several
>>> materials, very nice and priced well.
>>>
>>> Either way, lots of good info out there.
>>>
>>> http://www.rcgroups.com/forums/showthread.php?t=1839667
>>>
>>>
>>> On Mon, Nov 11, 2013 at 6:08 PM, David <ainut at knology.net> wrote:
>>>
>>>>  I would thoroughly enjoy a quad- or other copter that does video.
>>>> Cheapest I can find on the market is north of $600.  Any one have a better
>>>> source?
>>>> Wouldn't mind building one based around a Beaglebone Black, Raspberry
>>>> Pi, or Arduino.  :)
>>>>
>>>> Thanks,
>>>> David Merchant
>>>>
>>>>
>>>>
>>>>
>>>> Daniel Hess wrote:
>>>>
>>>> I have a spreadsheet of all the parts I bought to build a hex and quad
>>>> that I will send later
>>>>
>>>> On Nov 11, 2013, at 5:53 PM, Joshua Pritt <ramgarden at gmail.com> wrote:
>>>>
>>>>   One of my projects I want to do is a fpv multicopter with a camera
>>>> on a gimbal that moves based on a head tracker built into vr goggles.  Then
>>>> you move the copter through space with a 3D mouse.
>>>> Search our wiki for VRCopter.
>>>>  On Nov 11, 2013 6:17 PM, "Nathan" <indigo_ecs at yahoo.com> wrote:
>>>>
>>>>>
>>>>> Hiya gals and guys.
>>>>>
>>>>> I seem to remeber the last time I was over there a couple of people
>>>>> were working quadcopters. I dont suppose anyone still is or perhaps can
>>>>> teach me to fly one? I was doing KAP but i think id rather get into quad or
>>>>> hex aireal photography....
>>>>>
>>>>> Let me know!
>>>>> Nathan
>>>>>
>>>>> _______________________________________________
>>>>> General mailing list
>>>>> General at lists.makerslocal.org
>>>>> http://lists.makerslocal.org/mailman/listinfo/general
>>>>>
>>>>   _______________________________________________
>>>> General mailing list
>>>> General at lists.makerslocal.org
>>>> http://lists.makerslocal.org/mailman/listinfo/general
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> General mailing listGeneral at lists.makerslocal.orghttp://lists.makerslocal.org/mailman/listinfo/general
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> General mailing list
>>>> General at lists.makerslocal.org
>>>> http://lists.makerslocal.org/mailman/listinfo/general
>>>>
>>>
>>>
>>> _______________________________________________
>>> General mailing list
>>> General at lists.makerslocal.org
>>> http://lists.makerslocal.org/mailman/listinfo/general
>>>
>>
>>
>> _______________________________________________
>> General mailing list
>> General at lists.makerslocal.org
>> http://lists.makerslocal.org/mailman/listinfo/general
>>
>
>
> _______________________________________________
> General mailing list
> General at lists.makerslocal.org
> http://lists.makerslocal.org/mailman/listinfo/general
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.makerslocal.org/pipermail/general/attachments/20131112/468da0ee/attachment-0001.html>