[General] multi-roter drones...

[Dan Hess]

Heh, I appreciate you asking, but I didn't post it here expecting it to
remain hidden in secret from the world.  It's in the wild now, share away!

I will eventually post it to the MidsouthMakers wiki when I'm actually more
done with it.  I was planning on making a frame setup out of 3D printed
parts and wood, but haven't designed the parts yet.


Thanks,

Daniel H.
Google Voice:  (901) 214-5326

- Copying one is plagiarism, copying many is research.


On Tue, Nov 12, 2013 at 12:57 PM, WebDawg <webdawg at gmail.com> wrote:

> I like this.  Can I post it on a wiki?
>
>
>
> On Tue, Nov 12, 2013 at 8:54 AM, Dan Hess <dan9186 at gmail.com> wrote:
>
>> Ok, as promised here's my spreadsheet on parts.  Since I'm building a
>> mini quad and a hex, I made another page that accounts for the minimal
>> overlap between the two.
>>
>> I built this list while a few others were building theirs and came to the
>> realization that they were breaking more than they had hoped for and had to
>> wait on parts to get in and such.  So I've included a few extra of some of
>> the parts that seem to get broken.  They've been noted, so if you wish to
>> ignore them you can.
>>
>> This whole thing does not include an actual frame since there are several
>> out there you can buy or print.  The hex, I did spec for a 550mm diagonal
>> from motor to motor.  If you go lower than that, you might touch blades and
>> bad things ensue.
>>
>>
>> https://docs.google.com/spreadsheet/ccc?key=0AifgCfuTOa2hdG1HdHg4d3dZOXBmNU1iaUtPM2ZmTkE&usp=sharing
>>
>>
>> Thanks,
>>
>> Daniel H.
>> Google Voice:  (901) 214-5326
>>
>> - Copying one is plagiarism, copying many is research.
>>
>>
>> On Mon, Nov 11, 2013 at 9:55 PM, claudio donndelinger <
>> orias3141 at gmail.com> wrote:
>>
>>> There's also a group of RepRap users on Freenode in #multirotors.
>>> There's several helpful people in addition some helpful vendors as well.
>>>
>>> Claudio Donndelinger
>>> 323-963-3141
>>>
>>>
>>> On Mon, Nov 11, 2013 at 9:48 PM, Stephan Henning <shenning at gmail.com>wrote:
>>>
>>>> For you guys interested in multirotors, I'd suggest heading over to
>>>> rcgroups and checking out what these guys are doing.
>>>>
>>>> Ran into one thread where a gentlemen is building quad frames in
>>>> several materials, very nice and priced well.
>>>>
>>>> Either way, lots of good info out there.
>>>>
>>>> http://www.rcgroups.com/forums/showthread.php?t=1839667
>>>>
>>>>
>>>> On Mon, Nov 11, 2013 at 6:08 PM, David <ainut at knology.net> wrote:
>>>>
>>>>>  I would thoroughly enjoy a quad- or other copter that does video.
>>>>> Cheapest I can find on the market is north of $600.  Any one have a better
>>>>> source?
>>>>> Wouldn't mind building one based around a Beaglebone Black, Raspberry
>>>>> Pi, or Arduino.  :)
>>>>>
>>>>> Thanks,
>>>>> David Merchant
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Daniel Hess wrote:
>>>>>
>>>>> I have a spreadsheet of all the parts I bought to build a hex and quad
>>>>> that I will send later
>>>>>
>>>>> On Nov 11, 2013, at 5:53 PM, Joshua Pritt <ramgarden at gmail.com> wrote:
>>>>>
>>>>>   One of my projects I want to do is a fpv multicopter with a camera
>>>>> on a gimbal that moves based on a head tracker built into vr goggles.  Then
>>>>> you move the copter through space with a 3D mouse.
>>>>> Search our wiki for VRCopter.
>>>>>  On Nov 11, 2013 6:17 PM, "Nathan" <indigo_ecs at yahoo.com> wrote:
>>>>>
>>>>>>
>>>>>> Hiya gals and guys.
>>>>>>
>>>>>> I seem to remeber the last time I was over there a couple of people
>>>>>> were working quadcopters. I dont suppose anyone still is or perhaps can
>>>>>> teach me to fly one? I was doing KAP but i think id rather get into quad or
>>>>>> hex aireal photography....
>>>>>>
>>>>>> Let me know!
>>>>>> Nathan
>>>>>>
>>>>>> _______________________________________________
>>>>>> General mailing list
>>>>>> General at lists.makerslocal.org
>>>>>> http://lists.makerslocal.org/mailman/listinfo/general
>>>>>>
>>>>>   _______________________________________________
>>>>> General mailing list
>>>>> General at lists.makerslocal.org
>>>>> http://lists.makerslocal.org/mailman/listinfo/general
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> General mailing listGeneral at lists.makerslocal.orghttp://lists.makerslocal.org/mailman/listinfo/general
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> General mailing list
>>>>> General at lists.makerslocal.org
>>>>> http://lists.makerslocal.org/mailman/listinfo/general
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> General mailing list
>>>> General at lists.makerslocal.org
>>>> http://lists.makerslocal.org/mailman/listinfo/general
>>>>
>>>
>>>
>>> _______________________________________________
>>> General mailing list
>>> General at lists.makerslocal.org
>>> http://lists.makerslocal.org/mailman/listinfo/general
>>>
>>
>>
>> _______________________________________________
>> General mailing list
>> General at lists.makerslocal.org
>> http://lists.makerslocal.org/mailman/listinfo/general
>>
>
>
> _______________________________________________
> General mailing list
> General at lists.makerslocal.org
> http://lists.makerslocal.org/mailman/listinfo/general
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.makerslocal.org/pipermail/general/attachments/20131112/0d992a57/attachment.html>