[ML-Hams] new mast

[Hunter Fuller]

Okay, I am feeling much better about this now, thank you. I am evaluating
what gear we need to put on the pole and hopefully I get it right the first
time, but if not, it won't be so bad.

On Mon, Aug 22, 2016 at 11:36 AM Jeff Cotten <omegix at gmail.com> wrote:

>
> As an added plus, the clamps that keep the mast telescoped are opened and
> closed by hand, so we don't have to unbolt each section when retracting it
> :)
>
> On Mon, Aug 22, 2016 at 11:20 AM, Chris Bero <bigbero at gmail.com> wrote:
>
>> If it's telescoping, we shouldn't have to reach 50' to mess with the
>> antennas..
>>
>> Chris Bero
>>
>> On Mon, Aug 22, 2016 at 11:18 AM, Hunter Fuller <hfuller at pixilic.com>
>> wrote:
>>
>>> I guess 50 foot isn't THAT tall, but I still kind of assumed unbolting
>>> it would be somewhat of an operation.
>>>
>>> On Mon, Aug 22, 2016 at 11:13 AM Jeff Cotten <omegix at gmail.com> wrote:
>>>
>>>>
>>>> I've never done it before, but it should be as easy as climbing a tall
>>>> ladder and unbolting it from the mast.
>>>>
>>>> With the mast being telescoping, once we get to the top of the roof, we
>>>> can just collapse each section of the mast till we can reach where the
>>>> antenna is bolted onto the mast.
>>>>
>>>> On Mon, Aug 22, 2016 at 10:55 AM, Hunter Fuller <hfuller at pixilic.com>
>>>> wrote:
>>>>
>>>>> Jeff,
>>>>> I don't know anything about these things. How hard is it going to be
>>>>> for me to get my radio down from the mast, or change it for another one?
>>>>> I'm guessing the answer is "really hard."
>>>>>
>>>>> On Mon, Aug 22, 2016 at 10:38 AM Jeff Cotten <omegix at gmail.com> wrote:
>>>>>
>>>>>>
>>>>>> The one thing we might want to weld is a base plate.  They were
>>>>>> ungodly expensive at hamfest, for what amounted to a cafeteria serving tray
>>>>>> sized plate of steel with a 1 ft steel pole welded to its surface.
>>>>>>
>>>>>> Any tips on where to get scrap steel plates? :)
>>>>>>
>>>>>> On Mon, Aug 22, 2016 at 9:00 AM, Chris Bero <bigbero at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Now we don't have to worry about trying to weld one together. Wow,
>>>>>>> that's really excellent!
>>>>>>>
>>>>>>> Chris Bero
>>>>>>>
>>>>>>> On Mon, Aug 22, 2016 at 8:53 AM, Jeff Cotten <omegix at gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>>
>>>>>>>> I purchased a 50 foot telescoping fiberglass mast for the shop at
>>>>>>>> Hamfest on Sunday.  It's one of the large diameter HF masts, so it will
>>>>>>>> support multiple antenna mounts, and also reduce any grounding needs that a
>>>>>>>> metal pole would have required.
>>>>>>>>
>>>>>>>> Lisa will be dropping it off on Tuesday, and within a week or two
>>>>>>>> some extra parts for keeping it extended will arrive in the mail.
>>>>>>>>
>>>>>>>> The seller said however we mount it, to make sure the section
>>>>>>>> resting on the ground is held slightly off the ground so that rainwater can
>>>>>>>> escape out the bottom.
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> This is the hams mailing list.
>>>>>>>> This list is for amateur radio discussion.
>>>>>>>> To stop receiving mail from this list, write to
>>>>>>>> hams-leave at lists.makerslocal.org.
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> This is the hams mailing list.
>>>>>>> This list is for amateur radio discussion.
>>>>>>> To stop receiving mail from this list, write to
>>>>>>> hams-leave at lists.makerslocal.org.
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> This is the hams mailing list.
>>>>>> This list is for amateur radio discussion.
>>>>>> To stop receiving mail from this list, write to
>>>>>> hams-leave at lists.makerslocal.org.
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> This is the hams mailing list.
>>>>> This list is for amateur radio discussion.
>>>>> To stop receiving mail from this list, write to
>>>>> hams-leave at lists.makerslocal.org.
>>>>>
>>>>
>>>> _______________________________________________
>>>> This is the hams mailing list.
>>>> This list is for amateur radio discussion.
>>>> To stop receiving mail from this list, write to
>>>> hams-leave at lists.makerslocal.org.
>>>
>>>
>>> _______________________________________________
>>> This is the hams mailing list.
>>> This list is for amateur radio discussion.
>>> To stop receiving mail from this list, write to
>>> hams-leave at lists.makerslocal.org.
>>>
>>
>>
>> _______________________________________________
>> This is the hams mailing list.
>> This list is for amateur radio discussion.
>> To stop receiving mail from this list, write to
>> hams-leave at lists.makerslocal.org.
>>
>
> _______________________________________________
> This is the hams mailing list.
> This list is for amateur radio discussion.
> To stop receiving mail from this list, write to
> hams-leave at lists.makerslocal.org.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.makerslocal.org/pipermail/hams/attachments/20160822/24dfb477/attachment-0001.html>